202.6
Summary Chart – Area and Bulk Requirements – R-1 District.

REQUIREMENT RESIDENTIAL
LOT WIDTH REQUIREMENTS
Minimum Lot Width
60 feet
LOT AREA REQUIREMENTS
Minimum Lot Area
8,000 sq. ft
Maximum Building Coverage
40% Maximum Lot Coverage
YARD REQUIREMENTS
Minimum Front Yard Setback –
Recorded Plat or average
Principal or Accessory Use or
of abutting
Structure Minimum Side Yard Setback –
Two Side Yards totaling 15
Principal Use or Structure
feet - none less than 5 feet.

Minimum Side Yard Setback –
5 feet
Accessory Use or Structure
Minimum Rear Yard Setback –
30 feet
Principal Use or Structure
Minimum Rear Yard Setback –
5 feet
Accessory Use or Structure
BUILDING HEIGHTS
Maximum Building Height –
35 feet
Principal Use or Structure
Maximum Building Height –
14 feet
Accessory Use or Structure
202.7 NON-RESIDENTIAL
60 feet
20,000 sq. ft
35% 50%
Recorded Plat or 35 ft.

Two Side Yards required,
each 35 feet.

35 feet
75 feet
75 feet
45 feet
14 eet
Additional Regulations. The applicable Design Guidelines and Standards (Part 7)
and Requirements Applying to All Zoning Districts (Part 8) in this Chapter shall
apply to all Uses in the R-1 District.

§203 R-2 Single-family Residential District.

203.1 The R-2 Single-family Residential District is designed to provide for the
development of neighborhoods that are occupied primarily by Single-Family
residences, but with smaller Lots than the R-1 Single-family Residential District.

The purpose of the R-2 District is to promote orderly development of the
Municipality and encourage well-designed living environments which protect and
stabilize the residential characteristics of Mt. Lebanon. The District requirements
are intended to preserve, promote and protect a quality of urban residential living
characterized by unobstructed Front Yards, pedestrian-scale streetscapes and
Buildings scaled and designed to be compatible with the neighborhood.

203.2 Uses by Right. The following Uses are permitted in the R-2 District:
Updated 10/2021
XX-13